{"product_id":"ford-racing-15-17-f-150-20in-x-8-5in-six-spoke-wheel-matte-black","title":"Ford Racing 15-17 F-150 20in x 8.5in Six Spoke Wheel - Matte Black","description":"\u003cp\u003e\u003cb\u003ePart #:\u003c\/b\u003e M-1007-P2085MB\u003c\/p\u003e\u003cp\u003eFRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. Impact Testing: This test simulates a curb impact on the side of a tire\/wheel assembly. During testing, a tire\/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9   inches onto the assembly at the tire\/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight.  Dynamic Cornering Fatigue Testing: This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight.  Dynamic Radial Fatigue Testing: This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire\/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight.  Chrome Quality Testing: Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper\/nickel\/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours.\u003c\/p\u003e\u003cp\u003eWheel |  Size 20x8.5 in. |  Bolt Pattern 6x135 mm. |  Offset 12.5 mm. |  Back Spacing 164.5 in. |  Incl. Center Cap |  Matte Black\u003c\/p\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":51780972511544,"sku":"F009 M-1007-P2085MB","price":705.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/4895\/3144\/files\/horsepower-asset-283334-4821048-square.webp?v=1779479158","url":"https:\/\/store.motormia.co\/products\/ford-racing-15-17-f-150-20in-x-8-5in-six-spoke-wheel-matte-black","provider":"MOTORMIA","version":"1.0","type":"link"}