{"product_id":"icon-2023-toyota-sequoia-3-4-5-lift-stage-8-suspension-system-tubular","title":"2023-2025 Toyota Sequoia 3-4.5 Inch Lift Stage 8 Suspension System Tubular Icon Vehicle Dynamics","description":"\u003cp\u003e\u003cb\u003ePart #:\u003c\/b\u003e K53238T\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics Stage 8 complete suspension system for the 2023-2025 Toyota Sequoia helps to free up the rear suspension movement while gaining strength and ground clearance with the addition of ICON billet aluminum rear lower links. This system offers improved on- and off-road performance, with significantly increased rear shock performance and heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35 Inch tires.To compliment the billet aluminum rear lower links, a 2.5 Series remote reservoir front coilover shock and tubular steel front upper control arm combo is included along with a front sway bar drop kit, dual rate rear coil springs and 2.5 Aluminum Series rear remote reservoir shocks.Features and Benefits:This Stage 8 system features the 2023-2025 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers. These adjustable coilovers allow up to 3-4.5 Inch of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5 Inch shock body and increased piston area over stock components yield the maximum travel possible (up to 40 Percent increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.The included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2025 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.ICON tubular steel adjustable rear lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2 inch of rear lift over stock on a non-TRD Sequoia or 0 Inch of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.Rounding out the Stage 8 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2025 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20 Percent of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.Vehicle specific design for 2023-2025 Toyota Sequoia2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock coolingAdjustable front ride heights from 3-4.5 Inch of front lift over stockTubular UCAs for added strength, durability, and alignment correction for better drivabilityUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulationIncluded sway bar drop brackets reduce bind in OE sway bar linksAllows for full wheel travel without overstressing OE componentsDual rate rear coil springs improve performance and ride quality while providing 0 inch or 2 inch of rear lift, depending on the vehicle's stock suspension packageTubular rear lower links improve rear end articulation and allow for pinion angle adjustment2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coiloversAll ICON shock absorbers are fully rebuildable and re-tunableDetailsActive Or Passive Suspension: PassiveAdjustable Compression: NoAdjustable Control Arm: YesAdjustable Damping: NoAdjustable Rebound: NoBushings Included: YesCoil Quantity Front: 2.0Coils Quantity Front: 2.0Coils Quantity Rear: 2.0Front Reservoir Style: RemoteFront Shock Body Diameter: 2.5Front Spring Rate Type: LinearGrade Type: PerformanceMaximum Lift: 4.5 InchMaximum Lift Front: 4.5 InchMaximum Lift Rear: 2.0 InchMinimum Lift Front: 3.0 InchMinimum Lift Rear: 0.0 InchMounting Hardware Included: YesOem Wheels \u0026amp; Tires Fitment: YesRear Reservoir Style: RemoteRear Shock Body Diameter: 2.5Rear Spring Rate Type: Progressive Dual RateRecommended Aftermarket Tires: 35 Inch X 12.50 Inch (Minor Fender Trimming And Modifications May Be Required)Recommended Aftermarket Wheels: Icon Alloys - 18x9 Inch W\/ 6 Inch Backspace \/ 25mm Offset, Icon Alloys - 17x8.5 Inch W\/ 5.75 Inch Backspace \/ 25mm OffsetReservoir Style: RemoteShocks Included: YesSpring Color: BlackSpring Material: SteelAdd On Part: 198000 - 2 Pin Coilover Spanner Wrench Kit, 198001 - Billet Spanner Wrench Kit, 55156 - 22-25 Tundra\/23-25 Sequoia\/24-25 Gx550 Diff Drop Kit, 191003 - Icon Short 2.5 Coil Wrap W\/Logo Pair (11.25-12.25), 191013 - Nipple Greasing Adapter Kit, 252012 - -4 To -10 Hose Shield Kit, 55164 - 22-25 Tundra\/23-24 Sequoia Aluminum Skid Plate Spacer Kit\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2023 Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 3-4.5\" of front lift over stock\u003c\/li\u003e\n\u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for full wheel travel without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eDual rate rear coil springs improve performance and ride quality while providing 3\" of rear lift\u003c\/li\u003e\n\u003cli\u003eBillet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment\u003c\/li\u003e\n\u003cli\u003e2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStage 8 includes 2.5 Series remote reservoir coilovers for 3-4.5\" of front lift, greater performance, and 35\" tire fitment. ICON UCAs and links correct alignment while rear coils with 2.5 Series remote res rear shocks balance the tuning.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":51832994070840,"sku":"I001 K53238T","price":6541.69,"currency_code":"USD","in_stock":true}],"url":"https:\/\/store.motormia.co\/products\/icon-2023-toyota-sequoia-3-4-5-lift-stage-8-suspension-system-tubular","provider":"MOTORMIA","version":"1.0","type":"link"}