{"product_id":"icon-2023-toyota-sequoia-3-4-5-lift-stage-9-suspension-system-billet","title":"2023-2025 Toyota Sequoia 3-4.5 Inch Lift Stage 9 Suspension System Billet CDCV Icon Vehicle Dynamics","description":"\u003cp\u003e\u003cb\u003ePart #:\u003c\/b\u003e K53239\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics Stage 9 complete suspension system for the 2023-2025 Toyota Sequoia upgrades front and rear shock absorbers to include Compression Damping Control Valves (CDCV) for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow crawling through the rocks or mobbing across the desert at full throttle.This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35 Inch tires. To compliment the CDCV equipped 2.5 Series coilovers and rear shocks, a billet front upper control arm kit is included along with a front sway bar drop kit and dual rate rear coil springs.Features and Benefits:This Stage 9 system features the 2023-2025 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDC Valves. These adjustable coilovers allow up to 3-4.5 Inch of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5 Inch shock body and increased piston area over stock components yield the maximum travel possible (up to 40 Percent increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2025 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.The dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Designed for shorter rear ride heights, these coil springs yield 2 inch of rear lift over stock on a non-TRD Sequoia or 0 Inch of rear lift height on a Sequoia equipped with the TRD Off-Road package, allowing for level a stance front to rear.Rounding out the Stage 9 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2025 Toyota Sequoia. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20 Percent of damping force to help better control hard bottom outs. Also equipped with CDC Valves, these offer 10 settings of compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.Vehicle specific design for 2023-2025 Toyota Sequoia2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock coolingAdjustable front ride heights from 3-4.5 Inch of front lift over stockAll shock absorbers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hardBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivabilityUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulationIncluded sway bar drop brackets reduce bind in OE sway bar linksAllows for full wheel travel without overstressing OE componentsDual rate rear coil springs improve performance and ride quality while providing 0 inch or 2 inch of rear lift, depending on the vehicle's stock suspension package2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coiloversAll ICON shock absorbers are fully rebuildable and re-tunableDetailsActive Or Passive Suspension: PassiveAdjustable Compression: YesAdjustable Control Arm: YesAdjustable Damping: YesAdjustable Rebound: NoBushings Included: YesCoil Quantity Front: 2.0Coils Quantity Rear: 2.0Damping Adjustment Type: ManualFront Reservoir Style: RemoteFront Shock Body Diameter: 2.5Front Spring Rate Type: LinearGrade Type: PerformanceMaximum Lift: 4.5 InchMaximum Lift Front: 4.5 InchMaximum Lift Rear: 2.0 InchMinimum Lift Front: 3.0 InchMinimum Lift Rear: 0.0 InchMounting Hardware Included: YesOem Wheels \u0026amp; Tires Fitment: YesRear Reservoir Style: RemoteRear Shock Body Diameter: 2.5Rear Spring Rate Type: Progressive Dual RateRecommended Aftermarket Tires: 35 Inch X 12.50 Inch (Minor Fender Trimming And Modifications May Be Required)Recommended Aftermarket Wheels: Icon Alloys - 17x8.5 Inch W\/ 5.75 Inch Backspace \/ 25mm Offset, Icon Alloys - 18x9 Inch W\/ 6 Inch Backspace \/ 25mm OffsetReservoir Style: RemoteShocks Included: YesSpring Color: BlackSpring Material: SteelAdd On Part: 198000 - 2 Pin Coilover Spanner Wrench Kit, 191003 - Icon Short 2.5 Coil Wrap W\/Logo Pair (11.25-12.25), 198001 - Billet Spanner Wrench Kit, 55156 - 22-25 Tundra\/23-25 Sequoia\/24-25 GX550 Diff Drop Kit, 55164 - 22-25 Tundra\/23-24 Sequoia Aluminum Skid Plate Spacer Kit, 191013 - Nipple Greasing Adapter Kit, 191014 - .25 Inch Collar Spanner Pin Wrench, 252012 - -4 To -10 Hose Shield Kit\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2023 Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 3-4.5\" of front lift over stock\u003c\/li\u003e\n\u003cli\u003eAll shock absorbers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n\u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for full wheel travel without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eDual rate rear coil springs improve performance and ride quality while providing 3\" of rear lift\u003c\/li\u003e\n\u003cli\u003e2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStage 9 includes 2.5 Series CDCV remote reservoir coilovers for 3-4.5\" of front lift, greater performance, and 35\" tire fitment. UCAs provide alignment correction and rear coils with 2.5 Series remote CDCV rear shocks balance the tuning.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":51832994693432,"sku":"I001 K53239","price":5920.97,"currency_code":"USD","in_stock":true}],"url":"https:\/\/store.motormia.co\/products\/icon-2023-toyota-sequoia-3-4-5-lift-stage-9-suspension-system-billet","provider":"MOTORMIA","version":"1.0","type":"link"}