{"product_id":"icon-22-23-toyota-tundra-2-3-25-lift-stage-4-3-0-suspension-system-tubular","title":"2022-2025 Toyota Tundra 2-3.25 Inch Lift Stage 4 3.0 Suspension System Tubular Icon Vehicle Dynamics","description":"\u003cp\u003e\u003cb\u003ePart #:\u003c\/b\u003e K53214T\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 3.0 complete suspension system for the 2022-2025 Toyota Tundra builds upon the Stage 1 3.0 suspension system with the upgrade to CDEV and ICON Intelligent control (IIC) for in vehicle, active compression damping adjustment. To compliment the 3.0 Series coilover shocks, 2.5 Aluminum Series CDEV rear remote reservoir shocks are included along with billet aluminum front upper control arms and a billet rear upper\/lower link combo, and a front sway bar drop kit.This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35 Inch tires.Features and Benefits:This Stage 4 system features the 2022-2025 Toyota Tundra VS 3.0 Series remote reservoir front coilovers equipped with CDE Valves. These adjustable coilovers allow up to 2-3.25 Inch of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50 Percent more piston surface area in the ride zone of the shock's travel, and 100 Percent in the InchBump Zone Inch, compared to 2.5 Series shocks. The multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40 Percent of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. Additionally, ICON's Vehicle-specific shock length yields the maximum travel possible (up to 40 Percent increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.The included ICON tubular upper control arm kit is designed to improve the overall performance of the new 2022-2025 Toyota Tundra with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.ICON tubular steel adjustable rear upper and lower links are made from 1-3\/4 x .313 wall DOM tubing and a multi-stage black powder coat finish for corrosion resistance. These rear link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.Rounding out the Stage 4 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2022-2025 Tundra. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20 Percent of damping force to help better control hard bottom outs. Also equipped with CDE Valves, these offer active, on the fly compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 3.0 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Tundra.Vehicle specific design for 2022-2025 Toyota Tundra3.0 Series front coilovers with ICON's multi-stage, tunable hydraulic InchBump Zone InchAdjustable front ride heights from 2-3.25 Inch of front lift over stock when used with included tubular UCAsICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changesTubular UCAs for added strength, durability, and alignment correction for better drivabilityUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulationIncluded sway bar drop brackets reduce bind in OE sway bar linksAllows for up to 40 Percent increase in front wheel travel over stock without overstressing OE componentsTubular rear upper and lower links improve rear end articulation and allow for pinion angle adjustment2.5 Aluminum Series rear remote reservoir shocks provide increased performance, 20 Percent increase in wheel travel, and balanced tune with coiloversAll ICON shock absorbers are fully rebuildable and re-tunableDetailsActive Or Passive Suspension: ActiveAdjustable Compression: YesAdjustable Control Arm: YesAdjustable Damping: YesBushings Included: YesCoil Quantity Front: 2.0Coil Spring End 1 Type: ClosedCoil Spring End 2 Type: ClosedCoils Quantity Front: 2.0Damping Adjustment Type: ElectronicFront Reservoir Style: RemoteFront Shock Body Diameter: 3.0Front Spring Rate Type: LinearGrade Type: PerformanceMaximum Lift: 3.25 InchMaximum Lift Front: 3.25 InchMinimum Lift Front: 2.0 InchMounting Hardware Included: YesRear Reservoir Style: RemoteRear Shock Body Diameter: 2.5Reservoir Style: RemoteShocks Included: YesSpring Color: BlackSpring Material: SteelAdd On Part: 198001 - Billet Spanner Wrench Kit, 252012 - -4 To -10 Hose Shield Kit, 198000 - 2 Pin Coilover Spanner Wrench Kit, 55156 - 22-25 Tundra\/23-25 Sequoia\/24-25 GX550 Diff Drop Kit, 55164 - 22-25 Tundra\/23-24 Sequoia Aluminum Skid Plate Spacer Kit, 191014 - .25 Inch Collar Spanner Pin Wrench, 191010 - Icon Raptor 3.0 Coil Wrap W\/Logo Pair, 55153 - 22-25 Tundra\/23-25 Sequoia Air Ride\/Auto Headlight Bracket Kit\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2022-2023 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e3.0 Series front coilovers with ICON's multi-stage, tunable hydraulic Bump Zone\"\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 2-3.25\" of front lift over stock when used with included tubular UCAs\u003c\/li\u003e\n\u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n\u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n\u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for up to 40% increase in front wheel travel over stock without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eBillet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment\u003c\/li\u003e\n\u003cli\u003e2.5 Aluminum Series rear remote reservoir shocks provide increased performance, 20% increase in wheel travel, and balanced tune with coilovers\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStage 4 includes 3.0 remote reservoir coilovers for 1.25-3.25a of lift, max off-road performance and 35a tire fitment. Tubular UCAs, links and 2.5 Series remote reservoir shocks for balanced shock tuning. CDEV for active damping adjustment.\u003c\/p\u003e\u003cp\u003eThis product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":51789719634232,"sku":"I001 K53214T","price":9829.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/4895\/3144\/files\/horsepower-asset-2298656-3485944-square_98bbd551-c901-4b31-bcb7-9f4c23b5acd5.webp?v=1774560098","url":"https:\/\/store.motormia.co\/products\/icon-22-23-toyota-tundra-2-3-25-lift-stage-4-3-0-suspension-system-tubular","provider":"MOTORMIA","version":"1.0","type":"link"}