{"product_id":"icon-22-23-toyota-tundra-2-3-5-lift-stage-13-2-5-suspension-system-billet","title":"2022-2025 Toyota Tundra 1.25-3.5 Inch Lift Stage 13 2.5 Suspension System Billet Icon Vehicle Dynamics","description":"\u003cp\u003e\u003cb\u003ePart #:\u003c\/b\u003e K53203\u003c\/p\u003e\u003cp\u003eThe ICON Vehicle Dynamics Stage 13 complete suspension system for the 2022-2025 Toyota Tundra builds upon the Stage 12 system with the addition of billet aluminum adjustable upper and lower rear links. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35 Inch tires.To compliment the billet aluminum rear links, a 2.5 Series CDEV remote reservoir front coilover shock and billet aluminum front upper control arm combo is included along with a front sway bar drop kit and 2.5 Aluminum Series CDEV rear remote reservoir shocks.Features and Benefits:This Stage 13 system features the 2022-2025 Toyota Tundra VS 2.5 Series remote reservoir front coilovers equipped with CDE Valves. These adjustable coilovers allow up to 1.25-3.5 Inch of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5 Inch shock body and increased piston area over stock components yield the maximum travel possible (up to 40 Percent increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input.The included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new 2022-2025 Toyota Tundra with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.ICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON's double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance.Rounding out the Stage 13 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2022-2025 Tundra. The 2.5 Aluminum Series shocks' larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20 Percent of damping force to help better control hard bottom outs. Also equipped with CDE Valves, these offer in vehicle, active compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 2.5 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Tundra.Vehicle specific design for 2022-2025 Toyota Tundra2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock coolingAdjustable front ride heights from 1.252-3.5 Inch of front lift over stock when used with included billet aluminum UCAsICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changesBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivabilityUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulationIncluded sway bar drop brackets reduce bind in OE sway bar linksAllows for up to 40 Percent increase in front wheel travel over stock without overstressing OE componentsBillet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coiloversAll ICON shock absorbers are fully rebuildable and re-tunableDetailsActive Or Passive Suspension: ActiveAdjustable Compression: YesAdjustable Control Arm: YesAdjustable Damping: YesAdjustable Rebound: NoBushings Included: YesCoil Quantity Front: 2.0Coils Quantity Front: 2.0Damping Adjustment Type: ElectronicFront Reservoir Style: RemoteFront Shock Body Diameter: 2.5Front Spring Rate Type: LinearGrade Type: PerformanceMaximum Lift: 3.5 InchMaximum Lift Front: 3.5 InchMinimum Lift Front: 0.75 InchMounting Hardware Included: YesRear Reservoir Style: RemoteRear Shock Body Diameter: 2.5Reservoir Style: RemoteShocks Included: YesSpring Color: BlackSpring Material: SteelAdd On Part: 198001 - Billet Spanner Wrench Kit, 56113 - 22-24 Tundra\/23-24 Sequoia Front Foam Bump Stop Kit, 198000 - 2 Pin Coilover Spanner Wrench Kit, 191014 - .25 Inch Collar Spanner Pin Wrench, 55164 - 22-25 Tundra\/23-24 Sequoia Aluminum Skid Plate Spacer Kit, 55153 - 22-25 Tundra\/23-25 Sequoia Air Ride\/Auto Headlight Bracket Kit, 191013 - Nipple Greasing Adapter Kit, 56111 - 22-25 Tundra Rear Hyd Bump Stop Kit, 56112 - 22-25 Tundra\/23-25 Sequoia\/24-25 GX550 Rear Foam Bump Stop Kit, 191003 - Icon Short 2.5 Coil Wrap W\/Logo Pair (11.25-12.25), 55156 - 22-25 Tundra\/23-25 Sequoia\/24-25 GX550 Diff Drop Kit, 252012 - -4 To -10 Hose Shield Kit\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2022-2023 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 1.252-3.5\" of front lift over stock when used with included billet aluminum UCAs\u003c\/li\u003e\n\u003cli\u003eICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)\u003c\/li\u003e\n\u003cli\u003eICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes\u003c\/li\u003e\n\u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for up to 40% increase in front wheel travel over stock without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eBillet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment\u003c\/li\u003e\n\u003cli\u003e2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStage 13 includes remote reservoir coilovers for 1.25-3.5a of front lift, better performance and 35a tire fitment. Billet UCAs, links and 2.5 Series remote reservoir shocks for balanced shock tuning. CDEV for active damping adjustment.\u003c\/p\u003e\u003cp\u003eThis product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":51832955961656,"sku":"I001 K53203","price":9912.36,"currency_code":"USD","in_stock":true}],"url":"https:\/\/store.motormia.co\/products\/icon-22-23-toyota-tundra-2-3-5-lift-stage-13-2-5-suspension-system-billet","provider":"MOTORMIA","version":"1.0","type":"link"}