{"product_id":"performance-inlet-manifold","title":"Performance Inlet Manifold","description":"The ELEVATE Volvo S80 T5 Performance Inlet Manifold (plenum) is engineered and constructed to provide maximum power and torque gains for the T5 (turbo five cylinder) engine. This is achieved by increasing both flow and capacity when compared to the restrictive stock, plastic inlet manifold. Careful attention to details throughout the manufacturing process ensures every one of our Performance Inlet Manifolds perform exactly as designed by our R\u0026amp;D team. Power gains are dependent on the state of tune of the engine, but a stock T5 engines will see a power gain of +14hp and +13ftlb (18 Nm), while a tuned engine with other ELEVATE components will see gains of over +26hp and +22ftlb (30Nm) of torque increase. The higher the engine output, the more effective our Performance Inlet Manifold becomes as additional air flow is required by the engine. This manifold accepts the MAP sensor which is connected to the end of the factory and Elevate Inlet Manifold.\n\nThis Inlet Manifold is precision sand cast and heat treated to 356-T6 specification, creating a strong, resilient product. After casting and heat treating, it undergoes accurate CNC machining on three different fixtures for proper alignment and inlet and outlet port sizing for optimal flow. The interior surface is coated with an epoxy coating for optimal, smooth air flow. The outlet ports measure 50.2 x 31.8mm, a perfect transition from the stock lower manifold's 51.1mm x 32.4mm inlet ports, and significantly larger than stock (47.6mm x 29.2mm) or competitor offerings. The design utilizes a gasket instead of O-rings to allow for larger port dimensions and to block heat transfer, keeping the inlet charge cooler.\n\nConstructed from cast aluminum, this manifold eliminates the risk of bursting under higher boost pressures, a known issue with factory plastic designs. It is pressure tested to 50psi (3.4bar) for burst resistance and uses zinc plated steel or brass connectors for strength and longevity, unlike some competitors' plastic fittings. Installation is straightforward for a do-it-yourselfer with basic automotive skills and hand tools, typically taking between twenty minutes to an hour and a half. Premium hardware and detailed instructions are included. The product is made in the USA and available in Bright Silver or Gloss Black finishes. This product is specifically for the turbo five-cylinder engine only.","brand":"Elevate","offers":[{"title":"Default Title","offer_id":52687933571384,"sku":"207:21002","price":755.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/4895\/3144\/files\/664707146.jpg?v=1784887709","url":"https:\/\/store.motormia.co\/products\/performance-inlet-manifold","provider":"MOTORMIA","version":"1.0","type":"link"}