{"product_id":"universal-crossmember-kit","title":"Universal Crossmember Kit","description":"While primarily intended for GM Rear-Wheel Drive vehicles from 1955 to the present, this kit can be modified for use in other manufacturer vehicles, though adaptation for the specific transmission mount pattern will be necessary.\n\nThis kit is tailored for the early GM 2-stud pattern with a 1-1\/2” center measurement. It requires the installer to possess cutting and welding capabilities. The components can extend up to a maximum overall length of 61\" across the vehicle. The RCKIT comes complete with two exhaust cutouts (8\" outer width, 7\" inner width), two 2\" x 2\" frame rail mounting angles, a 32\" length of tubing, a 13\" slotted center tube featuring an underside access pocket for easier transmission mount installation, a transmission mount washer plate, and an optional transmission mounting tab.\n\nInstallation requires either enlarging frame rail holes to 1\/2\" to accommodate the provided 7\/16\" hardware or using new Grade #8 fasteners if retaining the stock 3\/8\" hardware. The crossmember should be installed with the G Force label facing the rear, and the center tube's drain slot positioned on the bottom and passenger side. The exhaust clearance humps should be installed closed on top and open on the bottom.","brand":"GForce","offers":[{"title":"Default Title","offer_id":52872719368504,"sku":"RCKIT","price":238.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/store.motormia.co\/products\/universal-crossmember-kit","provider":"MOTORMIA","version":"1.0","type":"link"}