40mm Front and Rear Suspension Lift Kit

The Rising lift kit, with product code 19-15-023/001/40, provides a 40mm (1.6 inch) increase in ground clearance for the Hyundai Santa Fe Second Generation (CM) models from 2005 to 2012. This kit includes two front strut spacers and two rear coil spacers, along with a fitting kit featuring reinforced stud bolts. The spacers are constructed from high-grade polyurethane (SCU-PFL-100) with a Shore A hardness of 93A, offering advantages such as an additional damping effect, durability, and resistance to corrosion, making them a more affordable and longer-lasting alternative to metal spacers. This lift set is specifically compatible with the Hyundai Santa Fe [CM] 2 Generation, SUV 5-doors, produced between December 2005 and July 2009, and the facelifted 2 Generation model from August 2009 to August 2012. The total clearance increase can exceed 40mm depending on the condition of your vehicle's existing struts and springs. It's important to note that after installation, an alignment is strongly recommended to ensure proper wheel mounting angles (camber/convergence). If performing a DIY installation, a spring compressor tool is necessary, and welding may be required when replacing studs if the original stud holes are larger than the new studs' splines. The benefits of installing these polyurethane spacers include enhanced off-road performance, increased load capacity, reduced risk of mechanical damage to the engine housing, and minimized chances of bumper or body part scrapes. They are also a cost-effective solution for restoring factory ride height when stock springs lose their stiffness.