MSD Ignition Coil Blaster Ss Red Universal Add To Any MSD 6-Series Ignition MSD Ignition

Part #: 8207

Note: If installing the Blaster SS Coil to a points distributor or a non-current limiting ignition system without an MSD Ignition, a 0.8 ohm ballast resistor is required (MSD PN 8214). The resistor should wire in series along with any factory resistors on the positive coil wire.Don't let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps of current and maximum voltage output of 40,000 volts!Tough, rigid housing with a tall tower and brass primary terminals70:1 turns ratio and lower primary resistance produce high voltage outputEfficient winding design and assembly creates a compact housingImproved output coil for electronic ignitions, and MSD IgnitionsPrimary and secondary windings are encased in Ciba polyurethaneDetails:Emission Code: 1Inductance Mh: 6.9Maximum Voltage: 40,000Peak Current: 300.0Primary Resistance: 0.355Spark Duration: 0.22Turns Ratio: 2.92Warranty: Manufacturer's Limited 1 Year Warranty

Features:

• Improved output coil for electronic ignitions, and MSD Ignitions
• Efficient winding design and assembly creates a compact housing
• Primary and secondary windings are encased in Ciba polyurethane
• 70:1 turns ratio and lower primary resistance produce high voltage output
• Tough, rigid housing with a tall tower and brass primary terminals

Ignition Coil - Blaster SS - E-Core - 0.355 ohm - Male HEI - 40000V - 90 Degree Boot / Terminal Included - Red - Each