Description
Horsepower & Torque: 540 Horsepower / 535 FT. LBS. Torque. Compression Ratio: 10.0:1. BluePrint Engines Aluminum Heads. BluePrint Engines Hydraulic Roller Cam. BluePrint Engines Forged Crank. BluePrint Engines Forged Pistons. Block: BluePrint Engines High Strength Cast Iron Block, Manufactured and Machined in the USA!, Drilled and Tapped for Clutch Linkage, Mech Fuel Pump Provision: Yes, Passenger Side Dipstick, 1-Piece Rear Main Seal, 4-Bolt Main, 4.125" Bore. Rotating Assembly: BluePrint Forged Crankshaft, 4.000" Stroke, Forged 6.000" Connecting Rods, Forged Pistons, Internally Balanced Front and Rear. Cylinder Heads: BluePrint Aluminum Cylinder Heads - HP8103, 64cc Chamber, 2.08" Intake / 1.60" Exhaust Valves, 220cc Intake / 67cc Exhaust Runners. Cam Specs: Hydraulic Roller, .577 Intake / .577 Exhaust Lift, 240 Intake / 248 Exhaust Duration, @ .050-112 Degree Lobe Separation. Ignition Timing: Initial Timing 10-16° and Total Timing 32-34°. Also Includes: Holley 850cfm Double Pumper Carburetor w/ Manual Choke - BPP04781S, Satin Aluminum Intake Manifold - BPP427454INT, Pro Series Ready Run Distributor - BPP3503BK, Thermostat and Thermostat Housing, Valve Covers - BPP9518, Spark Plugs and Wires, Electric Fuel Pump, Timing Cover, Oil Pan, Polished Front Accessory Drive - BPP350FDACPS4, Reverse Rotation Short Water Pump, Type II Power Steering Pump, Remote Power Steering Pump Reservoir, 140amp 1-wire Alternator, 7B10 Peanut Style Air Conditioning Compressor. Assembled with Complete TKX Transmission Package: Mcleod Super Street Pro Single Disk Clutch, Hydraulic Throw Out Bearing, Bell Housing, Billet Flywheel, Starter, First Gear Ratio: 2.87:1, Second Gear Ratio: 1.89:1, Third Gear Ratio: 1.28:1, Fourth Gear Ratio: 1.00:1, Fifth Gear Ratio: 0.81:1. Notes: The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. Not for use in pollution-controlled vehicles. The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
