CCB-21 EXTRA WIDE SUN-DURA

Designed for Center Console Bay Style Fishing Boats w/ Shallow Draft Hull. Cover Accommodates: Console Height up to 56" (measured from the deck). Bow Rails up to 8". Fit Type: Styled-to-Fit®. Available for Outboard (O/B) motor types. Includes attached outboard motor cover. Hem type: 1/4" strong and durable shock cord encased in hem for snug fit. One heavy-duty tie-down kit included (12 tie-down straps). An additional tie-down kit is recommended for covers 20' and over. Trailerable when properly installed and secured. Note: This cover is not designed with a trolling motor allowance. If your boat is equipped with a trolling motor, please contact us for proper cover application. This cover will not accommodate a hard or soft t-top. If your boat is equipped with a hard or soft t-top, please see our Specialty Covers for Rounded Bow Bay Style Center Console Shallow Draft Fishing Boats w/ Hard or Soft T-Top or contact a customer service representative for guidance. The cover is made to fit a boat with a flat/rounded (not a v hull) front and a shallow draft. Shallow draft means the side of the boat hits you at or below your knee when you are standing in the boat. This cover is made for a boat of standard width- anywhere from 80-102” depending on the length. If you have the narrow version of this style (67-77” wide), you need our narrow cover. If your boat is a few inches wider than what we list, chances are the cover will still accommodate for your boat as long as your console height does not exceed 55”. Manufacturers of this type of boat include Carolina Skiff, Polar Kraft, McKee Craft and Sea Ark. This cover will accommodate for a console up to 55” tall from the floor up. The cover is designed for bow rails up to 8” tall. Included is an attached cover for the largest outboard motor allowed on your boat by law.