Complete Lift Kit with Bilstein 5100 Shocks and Eibach Coils

The Old Man Emu BSE00CS is a comprehensive lift kit designed for the 2001-2007 Toyota Sequoia, offering a substantial upgrade over factory suspension components. This kit integrates Bilstein 5100 adjustable front coilovers, pre-assembled with Old Man Emu (OME) lift springs, and Bilstein 5100 rear shocks. Complementing the front setup are Eibach 1-inch rear lift coils, engineered to provide a balanced lift while enhancing towing stability and off-road control. The front suspension features Bilstein 5100 shocks with a 46mm monotube design and digressive valving, housed in a zinc-plated body for corrosion resistance. These coilovers offer a lift range of approximately 1.5 to 3 inches. However, due to the OME coil preload, the Bilstein shocks must remain at the bottom snap-ring setting to prevent spring over-compression, potential suspension damage, and warranty voidance. The rear suspension utilizes Eibach 1-inch lift coils, manufactured in the USA and backed by a Million-Mile Warranty, increasing ground and fender clearance and better balancing the front lift. This kit is a direct bolt-on for both 2WD and 4WD 2001-2007 Toyota Sequoia models and is compatible with factory upper control arms. Installation requires an alignment after completion. Important notes include that the front Bilstein snap-ring must remain at the bottom setting, as higher settings can over-lift the front and cause damage. The OME coil preload inherently provides lift, and the rear shocks do not provide lift on their own; rear coils are necessary for rear lift. While aftermarket UCAs are not strictly required, they are recommended for optimal caster adjustment during alignment and improved articulation. A differential drop kit is also recommended for 4WD trucks with 1.5 inches of front lift or more to extend CV axle life.