Front Drift Angle Lock Kit

The Wisefab WF350 is a front drift angle lock kit engineered to enhance steering capabilities for the 2003-2008 Infiniti G35 and 2003-2009 Nissan 350Z. This kit aims to provide increased steering angle and improved handling for drift applications. The components include a one-piece lower control arm design, which also offers shock motion ratio adjustment. The included knuckles feature built-in Ackermann adjustment, allowing for fine-tuning of steering characteristics. The kit is designed to achieve up to 65 degrees of lock while maintaining parallel steering and offering very good camber control with minimal bump steer, even at high steering angles. It also provides steering jacking control and consistent, predictable self-alignment torque. Installation of this kit requires coilovers to ensure adequate clearance. The designed ride height is approximately 80mm from the front subframe to the ground. Depending on rim width and offset (ET), wider fenders or fender flares may be necessary. Inner wheel wells do not require modification for tire diameters up to 635mm (e.g., 215/45R17, 225/45R17, 235/40R17, 225/40R18). The minimum recommended rim diameter is 17 inches, with a recommended backspacing of approximately 135mm. The kit is manufactured for immediate use after installation and toe adjustment. The kit includes two pre-set upper control arms, two pre-set lower control arms, two knuckles with hardware, and one assembled tie rod kit. It is backed by Wisefab's Limited Manufacturer's Warranty.