G37 Hydro E-Brake

The Henko AutoLab G37 Hydro E-Brake is a specifically designed hydraulic handbrake for the G37 chassis, also fitting 2007-2008 G35 Sedans with the same center console. Installation is straightforward, requiring only the unbolting of the shifter boot bracket and direct bolting of the hydro bracket, eliminating the need for custom fabrication or welding. Its design utilizes the factory ash tray hole to pass the hydro handle through the console, ensuring a clean, reversible installation without any cutting. It can be plumbed inline with your factory brake system using Henko AutoLab's Z/G Inline Hydro E-Brake Line Kit, acting as a pass-thru system to operate the factory rear caliper brakes. Alternatively, it can be upgraded to a dual rear caliper setup by adding their Remote Reservoir with feed line and Z/G Dual Caliper Kit. This setup utilizes an external reservoir that bolts in with the OEM clutch fluid reservoir for easier fluid checks and filling. The product is compatible with .625", .70", or .750" Wilwood master cylinders, with recommendations provided based on rear caliper types. For single-piston rear calipers, .625" or .70" may be suitable, while Brembo/Akebono calipers might benefit from .70" or .750". A .625" master offers a softer pull with a longer throw, whereas a .750" master provides a shorter throw but requires more force. The .70" master is generally recommended as a balanced option. Bench bleeding the master cylinder before installation is also highly advised for easier fluid system bleeding. Additionally, the handle grips are interchangeable with 1911 grip panels, allowing for extensive customization.