HEAT EXCHANGER; B4X/B58 F2X/F3X

Part #: D780-0002

The factory B4x/B58 heat exchanger is not built to cater to the rigorous demands often associated with a modified build. The thin core is easily overwhelmed with IAT's rising dramatically once pushed beyond a few successive WOT pulls or even a few minutes at the track. This elevation in temperature gives way to the factory ECU fail safes pulling timing and reducing overall power in order to keep the system from overheating to the point of permanent damage. On an application where enjoyment is directly attributed to pushing the platform to its limits this constraint to cooling presents a challenge for the automotive enthusiast.

Features:

• Average of 8&deg reduction in IAT's with a maximum reduction of 15&deg over 15 successive WOT pulls
• Reduces the tendency to heat soak / go in to limp mode
• 48mm thick Dinan cooler vs. 27mm thick stock cooler
• 78% more cooling surface area and volume than stock
• 100% TIG welded and pressure tested
• Installation hardware included (inclusive of xDrive specific transmission oil cooler brackets)

F22/F23/F30/F31/F32/F33/F34/F36