Air and Fuel Fuel Pumps, Regulators and Components

AirDog

II-4G Fuel Air Separation System

$739.50

SKU: A6SABC409

Special Order
Special Order
Ships in 4–6 weeks
Free Shipping over $200
$100 Minimum Order
30 Days Return
INSTALL DIFFICULTY
DIY PRO SHOP

Moderate — 2–4 hours

Overview

The AirDog A6SABC409 is an Air/Fuel Separation System designed for 2001-2010 Chevy/GMC Duramax 6.6L Diesel engines. This diesel lift pump system offers a flow rate of 165 GPH. It mounts to the frame rail and connects to the factory suction and pressure lines.
Show original supplier description
The AirDog II-4G A6SABC409 is an advanced air/fuel separation system engineered to enhance the performance and longevity of 2001-2010 GM 6.6L Duramax diesel engines. This system actively removes water, vapor, particulates, and entrained air from your diesel fuel, ensuring cleaner fuel delivery to the engine. Its innovative design utilizes a dual-feed Gerotor pump and a low-amperage motor, which contributes to its efficiency, endurance, and remarkably quiet operation, making it one of the quietest fuel systems in the diesel market. The AirDog II-4G features a preset pressure of 8 PSI and a flow rate of 165 GPH, making it suitable for engines producing between 500 and 800 horsepower. By maintaining correct injection timing, eliminating spray pattern disruption, and allowing for a full power stroke and complete burn, this system directly improves throttle response, leads to a smoother idle and acceleration, and can increase fuel economy, power output, and torque output. It also helps overcome power loss experienced at higher altitudes and contributes to longer injector life and reduced exhaust emissions. Constructed with an intermediate pump shaft that separates the electric motor from the fuel, the AirDog II-4G mitigates potential issues from damaged seals. The self-aligning motor design further reduces maintenance requirements and increases system endurance for a longer pump life. The system includes a comprehensive installation kit with a relay control wiring harness, all necessary fuel fittings, mounting hardware, and 1/2" fuel lines with OEM-style quick connect fittings. The compact dimensions are only 7"L x 10"T x 3.2"W. This system is specifically designed for 2001-2010 GM 6.6L Duramax engines. It mounts to the frame rail and connects to the factory fuel module and injection pump feed line, with the air/vapor return routed back to the tank. While installation is described as easy, it's important to note that the warranty may be void if purchased under MAP (Minimum Advertised Price) unless during an approved AirDog sale.
Vehicle Symptoms
  • Loss of power on acceleration
  • Rough idle or stalling at stops
  • Hard starting or long cranking times
  • Excessive diesel knock or misfire
  • Poor fuel economy under normal driving
Diagnostic Codes
  • P0300 – random misfire
  • P0191 – Fuel Rail Press Snsr A Ckt Range/Perf
  • P0087 – Fuel Rail/System Pressure – Too Low
  • P0088 – Fuel Rail/System Pressure – Too High
  • P0216 – Injection Timing Ctrl Ckt Malf
Relevant Conversations
  • 2004 Duramax rough idle and stalling after warm up
  • AirDog vs FASS for 6.6L LB7 LLY
  • P0300 random misfire 2006 Chevy 2500HD Duramax
  • How to install AirDog II on frame rail Duramax
  • Duramax hard start in cold weather fuel system upgrade
  • AirDog A6SABC409 for 2001-2010 Duramax review
  • Why does my LBZ diesel have low rail pressure code
  • Best air fuel separation system for 2005 GMC Duramax
  • Can a bad lift pump cause P0191 code on Duramax
  • Upgrading fuel system before injector failure Duramax

Product descriptions are provided by our supplier partners and may not always be perfectly accurate. Not sure this fits? or call (760) 282-4645 and we’ll verify before you order.

Fitment

Fitment Guaranteed

Don’t gamble
on fit.

Log your build in the MOTORMIA app and we’ll guarantee this part fits your exact setup — or your money back, return shipping covered.

Available on iOS & Android

Specifications

BrandAirDog
Part NumberA6SABC409
CategoryAir and Fuel

About MOTORMIA

5,000+ Trusted brands
1M+ Enthusiasts
5M+ Parts sold

Buy with Confidence

Returns & Fitment

Built for enthusiasts. Every order is backed by our 30 day return window on eligible items. Unused and uninstalled products may be returned with approved RMA and no restocking fees when received in new condition. Orders placed through the MOTORMIA app with a complete build qualify for our Fitment Guarantee — free return shipping if the part doesn’t fit your exact setup. The guarantee covers fit only; installation must follow manufacturer instructions, and we recommend a qualified shop for parts marked Difficulty 4–5.

View Full Return Policy

Shipping

Orders are processed in 1–3 business days. In stock parts ship promptly from our partner network. Special-order items either aren’t currently stocked or are built to your spec — expect 4–6 weeks. If a part goes on backorder while your order is in the queue, we’ll reach out and work through discounted alternatives together.

Free shipping over $200 in the continental US. Alaska, Hawaii, U.S. territories (Puerto Rico, U.S. Virgin Islands, Guam, American Samoa, and the Northern Mariana Islands), and international orders carry surcharges — most appear at checkout. Some exceptions (LTL freight, or suppliers who quote freight only after we place the order) won’t. In those cases we’ll reach out with the exact charge before your order moves forward.

View Full Shipping Policy