Jeep Gladiator JT 6.5 Inch Heavy Duty Enforcer Overland Lift Stage 3 Plus w/ EVO SPEC 2.5 Inch King Shocks EVO Manufacturing

The EVO MFG 6.5” Jeep Gladiator JT Enforcer Suspension Systems lift your 2020+ Jeep Gladiator JT 6.5”. These kits are specifically designed and engineered to lift your JT and maintain a performance spring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 6” lift shock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks. These kits come with a set of 4.5” lift springs specific to each corner which will keep the Jeep Gladiator JT level side to side. The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets, which relocate the front control arm mounting locations at the frame to maintain flatter control arm angles and improve ride quality, braking, and driveline angles. Simple Bolt on installation. No drilling or cutting. No exhaust modifications required. All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation. The included Enforcer arms are manufactured from large diameter, thick wall DOM Steel Tubing for ultimate in strength and longevity both on and off the trail. These kits require wheel spacers or aftermarket wheels with smaller backspacing and aftermarket front driveshaft. Front and rear adjustable track bars to fine tune axle center are included with PLUS “P” kits. “K” Kits include a set of 4 EVO SPEC Remote Reservoir King Shocks. *FOR 4.5”/6.5” JT Lifts: Front Lower and Rear Upper Adjustable Control Arms and Front & Rear Adjustable Track bars are required for proper alignment/install. These components are included with Stage 3 and Stage 4 "PLUS" Kits. 4.5”/6.5” JT Lifts: Front Lower and Rear Upper Adjustable Control Arms and Front & Rear Adjustable Trackbars are required for proper alignment/install. These are included with Stage 3 and Stage 4 "PLUS" Kits. Draglink Flip Kit is recommended (not included). 6.5” Gladiator kits require an aftermarket front driveshaft. Rear aftermarket driveshaft is recommended. EVO-3027B JL/JT Protek Front Shock Relocation Brackets are recommeded with 2.5” King shocks or with all larger aftermarket shock options. (Not Included)