Suspension and Components Suspension Kits

EVO Manufacturing

Jeep Wrangler JLU 2.5 Inch Heavy Duty High Clearance Long Arm w/EVO SPEC King 2.5 Inch Shocks EVO Manufacturing

$7,058.30

SKU: E00U EVO-3015HDK

Out of Stock
Special Order
Ships in 4–6 weeks
Free Shipping over $100
Non-Returnable Item
INSTALL DIFFICULTY
DIY PRO SHOP

Advanced — 4+ hours

Description

Part #: EVO-3015HDK

The EVO MFG 2.5 inch JLU High Clearance Long Arm kit will like your JLU 2.5 inchs. Through specifically designed bracketry we accomplish the ultimate in suspension and chassis clearance, larger wheel travel ability, optimal suspension geometry with increased ride quality. Clearance, ride quality, performance and ease of installation was our focus in creating this long arm suspension system.The front arms mount tucked up inside nearly flush with the bottom of the frame mounting inches above the stock front lower mounting bracket. The rear mounting locations for the long arm are on the side of the frame, above the bottom giving inches of clearance over the factory locations as well. Keeping optimal geometry while maintaining as much clearance was critical in the design of this system.In doing so, not only did we raise the rear control above the frame but we raised its mounting at the rear axle by multiple inches as well. This allows for an incredible ground clearance increase but just as importantly retaining flat and optimal control arm angles giving ideal ground clearance, smooth ride quality and long travel ability.The mounting brackets are specifically designed to require no exhaust cutting on 3.6L Jeep Wrangler JLU's (minor grind/clearance to flange required) and have full length hard-face mounting surfaces that weld to your frame giving redundant and ample welding area and strength to their mounting. The mounting brackets align to the frame simply using existing factory holes giving complete assurance of proper locating during install. Simply bolt brackets up to frame with existing hardware and weld them in place.These kits come with a set of 2.5 inch Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JLU more level side to side and will maintain a unique and compliant ride quality. EVO MFG Long Arm joints feature Johnny Joints on both ends of the control arms for restriction free articulation and motion with no wearable and limited bond rubber. All long arms come complete with EVO1 on vehicle adjuster making alignment a snap allowing for the ability to adjust control arm lengths while completely installed on the vehicle at all times.All EVO MFG lower long arms are built with strength in mind. These arms are made from industry leading 2.0 inch x .281 inch wall Steel DOM Tubing. Include in these kits is front brakeline extension brackets, Rear swaybar endlinks and front and bumpstop extensions. Cutting, grinding and welding of frame brackets required.he EVO MFG 2.5 inch High Clearance Long Arm kits require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Option of retaining factory shocks, maintaining wheel travel with use of shock extensions (part number EXT kits) or without shock extensions to allow for use of your choice of aftermarket 2/2.5 inch lift shocks.EVO3015K kits come with EVO SPEC King 2.5 inch Remote Reservoir shocks all 4 corners. EVO MFG JL 2.5 inch High Clearance Long Arm Kits will fit up to a 37 inch tires on Rubicon Model JLUs or 35 inch tires on Sahara and Sport/S (Larger tires clearance with aftermarket fenders or trimmed factory fenders).2.5 inch lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary.Notes:Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to trimmed/removed to fully clear some tires under compression.These kits require wheel spacers or aftermarket wheels with smaller backspacing.Front and rear adjustable trackbars are included with PLUS P inch kits.Features:Jeep Wrangler JLU 2.5 Inch Heavy Duty High Clearance Long Arm w/EVO SPEC King 2.5 Inch ShocksSeries: Heavy Duty High ClearanceLift Height: 2.5 InchHardware Included: YesShocks Included: YesSold As: Kit

MIA's Description

All products manufactured by EVO Manufacturing carry a Limited Lifetime Warranty against defects in material and craftsmanship. This warranty is valid only for the original purchaser and the original vehicle on which it was installed. Proof of purchase is required for all warranty claims. EVO Manufacturing is not responsible for labor charges, shipping charges, or other costs resulting from a warranty claim. Incidental and consequential damages are excluded. All products must be installed correctly, unaltered, free from abuse, and combined with appropriate equipment/products/components. Returns/warranty products must be received in new, unused, unmodified, and undamaged condition to qualify for credit. Exceptions to the warranty include wearable items (tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings, and hardware). Any substitution of other manufacturers' components or exemption of required components will void all warranties. EVO Manufacturing does not warranty products not manufactured by them. The warranty applies only to products purchased, sold, installed, and remaining in the United States of America. Product finishes are warranted to be free from defects at the time of sale only. Springs and Shocks are warranted against manufacturing defects only and are returnable only if they have not been installed on a vehicle. Products used for competition or racing immediately void all warranties. EVO Manufacturing recommends installation by certified technicians only and is not responsible or liable for any loss, damage, or injury. Electronic components provided by EVO MFG have a 90-day warranty and must be free from tampering, accidental damages, or abuse. EVO Manufacturing is not responsible for typographical errors.

Fitment

Fitment Guaranteed

Don’t gamble
on fit.

Log your build in the MOTORMIA app and we’ll guarantee this part fits your exact setup — or your money back, return shipping covered.

Available on iOS & Android

Specifications

BrandEVO Manufacturing
Part NumberE00U EVO-3015HDK

Videos

Buy with Confidence

Built for enthusiasts. Every order is backed by our 30 day return window on eligible items. Unused and uninstalled products may be returned with approved RMA and no restocking fees when received in new condition. Orders placed through the MOTORMIA app with a complete build qualify for our Fitment Guarantee — free return shipping if the part doesn’t fit your exact setup. The guarantee covers fit only; installation must follow manufacturer instructions, and we recommend a qualified shop for parts marked Difficulty 4–5.

View Full Return Policy