Johnny Joint Rod End 2 1/2 Inch Narrow Forged 2.375 Inch X .718 Inch Ball 1 1/4 Inch-12 RH Threaded Shank Externally Greased RockJock 4x4

Part #: CE-9114N-27

RockJock's Johnny Joint Rod Ends have been a staple in the off road industry since 1996! Available universally for builders or found in our RockJock suspension components, John Currie's proven formula provides a reliable, greasable, rebuildable joint that is capable of dramatic articulation in off-road applications, while still providing smooth, cushioned, quiet performance during on-road use.Johnny Joints are available as a forged rod end with various RH and LH thread sizes from 3/4 in. up to a massive 1 1/2 in. thread! Additionally, weld-on versions of all Johnny Joints are available for fabricators.Specialty joints, such as polished stainless steel, long body and bent forgings and application specific machined joints are all available for custom builder use.All sizes of joints offer a standard or a narrow width joint body which provide different levels of overall articulation range (30 plus degrees on a standard body and up to 40 plus degrees on a narrow body). The narrow body's 1 piece bushing will provide a slightly firmer ride.This 2 1/2 in. Johnny Joint incorporates our 1 1/4 in.-12 RH thread, narrow width, forged body and a 2.375 in. overall width x .718 in. thru-bolt hole pivot ball.Greasing is handled externally, via the installed 1/4 in.-28 zerk fitting.Rod End Fits:Universal Application91-92 Toyota FJ80 (Land Cruiser) - R upper and lower control arms93-97 Toyota FZJ80 (Land Cruiser) - R upper and lower control armsRod End Includes:(1) Forged Johnny Joint AssemblyRod End Features:23 degrees of articulation capabilityForged steel construction2 1/2 in. O.D. x 1.69 in. wide joint outer barrel3.250 inches of 1 1/4 in.-12 RH threads4.94 inches from CL of joint to end of threads1-piece bushing internals2.375 in. wide x .718 in. thru-hole pivot ballZerk fitting for greasingFully assembled, ready for use right out of the boxNotes:See CE-9114JN for a Jam Nut to fit this jointSee CE-9114B if a Weld-In Bung and Jam Nut are requiredSee RJ-576200-101 if a RockNut is requiredSee RJ-533000-1 for joint vertical stabilzation washersJohnny Joints require non-synthetic, hi-moly lube grease such as our CE-9013GApplicable Johnny Joint Tool for this Rod End: CE-9110TImportant- joints require greasing at normal intervals, but they do not hold a lot of grease! Over greasing can cause damage to the joint. To prevent damage, use only a hand pump grease gun, do not expect the joint to take a lot of grease and DO NOT use pneumatic or electric grease guns!

Johnny Joint (R) Rod End | 2 1/2 in. | Narrow Forged | 2.375 in. X .718 in. Ball | 1 1/4 in.-12 RH Threaded Shank | Externally Greased