Lift Kit, Front and Rear

The Paco Motorsports 3" suspension lift kit is a bolt-on solution designed to raise the ride height of your Mazda Miata NA or NB. This kit functions by extending the lower shock mounting point, resulting in a 3-inch increase in front ride height and a 3.25-inch increase in rear ride height. The lift kit is constructed from durable powdercoated steel and comes with a 1-year warranty. The increased ride height will alter your alignment, potentially limiting negative camber, which may not be ideal for track use but is suitable for gravel or dirt road setups. For those needing extreme camber with a high ride height, extended lower ball joints and adjustable rear upper control arms are available separately. Installation may present unique challenges, and buyers should be prepared for potential wheel fitment issues or interference problems, especially with different spring/shock assemblies. Specific stock wheel sizes (14" daisies and 2001 15" wheels) have been reported to interfere with stock springs at full droop. Difficulty installing with stock shocks has also been noted, requiring effort to align upper mounts at full droop. Some setups might experience shock-to-control arm contact at full droop. The kit is sold as a complete set. This lift kit fits 1990-1997, 1999-2005, and 2004-2005 MSM models. Running tires up to 25.5" in diameter on an NA is possible without fender modifications, but the late NB front fascia may interfere. Larger tires, like the 26" diameter tires shown, may require minor modifications.