Mustang 13-17 Honda Gold Wing F6B Touring Fastback 1PC Seat Tuck & Roll - Black

Compared to the original seat, Mustang's all-new Touring Fastback is better by design. The front seat sits the driver about 1 inch lower than stock for maximum control of the bike while stopped. The driver is also positioned further back "into the bike" with a full 8-inch rise for all-day back support. The passenger seat is contoured to take pressure off one's thighs. Designed to work with or without the stock passenger backrest. Most Mustang seats are designed to install just like your stock seat—using the same mounting points and hardware as your original seat. It usually takes about fifteen minutes to remove the stock seat and install your new Mustang seat. Meticulously designed so that the baseplate, foam, and cover components combine to make a comfortable seat. All seat components are hand assembled at their New England facility. Baseplates are constructed of either marine-grade fiberglass or steel. For Honda, Kawasaki, Yamaha, Suzuki, and Victory seats, baseplates are marine-grade, 3/16" thick fiberglass, finished in high gloss gel coat. All brackets are riveted in place. Exposed brackets are bright chrome plated. Polyurethane rubber bumpers are strategically located and riveted to the baseplate to prevent it from touching the frame and fender and to minimize vibration. For Harley-Davidson® seats, formed 16 gauge steel baseplates are black epoxy powder coated on both sides for complete rust-proofing. Carpet protects fender paint. Exposed brackets are bright chrome plated. Foam is compounded and molded at their New England facility. Formulated and cast to be soft enough for comfort and resilient enough for long rides. Mustang has over 25 years of experience in compounding the right chemical mix to create the best controlled-density polyurethane foam for all-day comfort. The foam has a density of approximately four pounds per cubic foot. Mustang does not use gel in their motorcycle seats, believing that foam provides better cushioning and support.