Pro Level Front Drift Angle Lock Kit

The Wisefab WFA90 is a PRO-level front drift angle lock kit engineered for the Toyota Supra A90. Tested by top drivers in Japan and the USA, this kit is built for drifting performance. All metal components, including sheet metal, tubes, and rod end housings, are made from high-strength steel. The suspension utilizes rod ends and spherical bearings, completely eliminating rubber bushings for enhanced responsiveness. This kit offers significant enhancements, including 65 degrees of lock with parallel steering and the ability to tune Ackermann geometry quickly. It features an adjustable lock stopper and a one-piece lower control arm design for increased stiffness and improved packaging at high steering angles. The higher roll center, achieved by dropping the knuckle joints, provides greater roll stiffness and allows for the removal of the front anti-roll bar, which can be difficult to package with extreme lock angles. Expect very good camber control and minimal bump steer, crucial for dynamic performance during drifts, ensuring excellent front grip. Installation of the Wisefab WFA90 requires specific components. The front wheel bearing must be sourced from a BMW E90 (part number 31216765157); OEM Supra bearings cannot be used. Note that the 5x120 PCD wheel bearing means OEM Supra wheels are incompatible. Brakes from a BMW E90 or E90 M3 are recommended, and while the OEM caliper can be used with the supplied adapter, modifications may be needed. OEM brake discs are not compatible and a suitable disc must be sourced. The strut's lower fixing diameter must be 56mm or 62mm, and ride-height adjustable coilovers are mandatory. While the OEM steering rack can be used, replacement with a rack mounted in the exact OEM position is recommended.