Rock Krawler 2018+ Jeep Wrangler JLU 4DR 2.5in X Factor System

The Rock Krawler JL 2.5 X Factor Mid Arm System was designed for those who want a complete bolt-in installation, maximum articulation from a mid-arm kit and the durability and off-road performance you expect from Rock Krawler Suspension. The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment that drastically reduces the bind inherent in JL factory lowers, while high misalignment adjustable upper control arms let you precision tune your JL’s caster both front and rear. Rock Krawler’s industry leading triple rate coils give you 2.5" of lift to clear up to 38" tires, depending on model, and improve the on-road ride over the factory linear rate springs. All Rock Krawler JL systems include correction pads that reduce the spring bow inherent in the factory set up. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on road handling. System Benefits: Complete Bolt in System, Excellent Highway Ride, Improved Off-Road Ability, Triple Rate Coil Springs, Front & Rear Spring Leveling Pads, Lifetime Warranty on All Hard Parts, Upgradeable to Rock Krawler JL Long Arm, Jeep remains level on all 4 corners. Tire Fitment: Sport and Sahara with Full OEM Fenders 35" Tall Tires (2" Bump Stop Height Recommended) Sport and Sahara with Trimmed or High Lined OEM Fenders 37" Tall Tires (3" Bump Stop Height Recommended) Rubicon with Full OEM Fenders 37" Tall Tires (2" Bump Stop Height Recommended) Rubicon with Trimmed or High Lined OEM Fenders 38" Tall Tires (Up to 40" Tall Tires for Ultra Low COG Stance) (3" Bump Stop Height Recommended). Wheel Fitment: Sport and Sahara Models 35" Tall Tires – Recommend 4.5" of Backspacing 37" Tall Tires – Recommend 3.5" of Backspacing Rubicon Fitment Models 37" Tall Tires – Recommend 4.5" of Backspacing 38"/40" Tall Tires – Recommend 3.5" of Backspacing. Notes: *All lift heights based on Rubicon models for standard style build (i.e., front bumper and winch, rear bumper and full-size spare). *If building with a spare delete, we recommend dropping 1” in coil lift height for the rear. *If building an overland or heavily upfitted build in the back, we recommend upsizing 1” in coil lift height for the rear.