Ryker 900 Turbo Kit

The Silber Turbos BRP Ryker 900 Bolt-On Turbo Kit is engineered to provide a substantial performance upgrade for the Can-Am Ryker 900. Built with over a decade of turbocharging expertise, this kit aims to deliver a transformative riding experience by significantly increasing horsepower and torque. The kit includes a custom turbocharger with a cast manifold, an adjustable wastegate actuator allowing boost pressure to be set between 3-8 psi, and all necessary oil feed, drain, and coolant lines. Key components also feature a K&N air filter with an outerwear, a stainless steel exhaust downpipe with an integrated heat shield, a 3Bar MAP sensor, and a silicone charge tube. The kit is designed for straightforward installation, estimated at 4-5 hours for the average consumer using basic hand tools, with no permanent modifications required to the Ryker. This means the turbo kit can be removed, returning the vehicle to its original state. Performance gains are significant, with the stock Ryker 900's 71HP boosted to an estimated 115HP at 5psi on pump gas, a 40% increase. This also represents a 30% increase over a highly modified naturally aspirated Ryker that includes a header, intake, and custom tune. The kit is designed with future potential in mind, with plans for tunes that support higher-octane fuels for even greater performance. For optimal operation, appropriate fueling and a programmer (such as a Dynojet PV3 Controller, sold separately or as part of a package) are recommended. Initial startup requires specific procedures, including ensuring oil flow to the turbo before the first engine start.